US-100CS Standing Seam PanelUS-100CS
Seam panel has a single upstanding leg on each side. After a panel is laid, the clips are installed up against the panel leg, with half of each clip folded over the leg. The adjacent panel is then laid up against the clips, and the other half of each clip is folded down. Finally the batten cap is snapped down over all clips in the seam along the entire length of the panel. The panels are now securely attached with the completed seam enclosing all clips. Seams require no machine closing and rapid installation means low in-place cost. Also available in 1-1/2" rib height (US-150CS). Cap Seam panel can also be curved or tapered. These panels create an architecturally desirable look without jeopardizing the integrity of the roof panel. The installation of the curved cap seam panel (US-100 CCS) and the tapered cap seam panel (US-100 TCS) is the same as the straight cap seam panel (US-100 CS). US-200SB Snap Batten System.http://www.ultraseam.com
Friday, August 22, 2008
US-175LS Lock Seam Panel
US-175LS Lock Seam Panel
Ribs of adjacent Lok Seam panels snap together, enclosing the concealed clips and provide a positive metal-to-metal lock. In turn, the enclosed clips positively secure the adjacent panels to the roof structure. Seams require no machine closing, yet are continuously and securely locked in place. By eliminating the need for mechanical seaming, installation time and cost can be greatly reduced. Also available in 1-1/2" rib height (US-150LS). The US-150LS has a slightly different locking detail from the US-175.http://www.ultraseam.com
Ribs of adjacent Lok Seam panels snap together, enclosing the concealed clips and provide a positive metal-to-metal lock. In turn, the enclosed clips positively secure the adjacent panels to the roof structure. Seams require no machine closing, yet are continuously and securely locked in place. By eliminating the need for mechanical seaming, installation time and cost can be greatly reduced. Also available in 1-1/2" rib height (US-150LS). The US-150LS has a slightly different locking detail from the US-175.http://www.ultraseam.com
Roofing Profiles US-200
US-200
Roofing Profiles US-200Profiles US-200 Standing Seam Panel The Ultra Seam standing seam system utilizes state of the art technology for roof integrity and positive weather-tightness. The Ultra Seam US-200 panel has been extensively tested in both steel and aluminum, and meets the stringent requirements of the “Standard Test Method for Structural Performance of SSMRS by Uniform Static Air Pressure Difference,” which has been adopted as ASTM E-1592. Seams require machine closing, by either hand or power seamers, both available on a job rental basis. The seaming process completely encloses and seals all clips and fasteners for the most watertight seal available. The US-200 panel, in addition to the standard 90-degree seam, can be double-locked to obtain a 180 degree architectural profile. The standing seam system is especially suitable where roof slopes are long and/or low, and unusually long panels are required. Available in various gauges of galvanized steel, galvalume, zincalume, aluminum, copper, zinc and stainless steel. Regardless of which material is selected, the optional stiffening ribs or striations are highly recommended in order to reduce the slight surface waviness of the metal known as “oil-canning.” Note: “oil-canning” is a natural phenomenon inherent in sheet metal products and therefore is not cause for rejection of the material.http://www.ultraseam.com
Roofing Profiles US-200Profiles US-200 Standing Seam Panel The Ultra Seam standing seam system utilizes state of the art technology for roof integrity and positive weather-tightness. The Ultra Seam US-200 panel has been extensively tested in both steel and aluminum, and meets the stringent requirements of the “Standard Test Method for Structural Performance of SSMRS by Uniform Static Air Pressure Difference,” which has been adopted as ASTM E-1592. Seams require machine closing, by either hand or power seamers, both available on a job rental basis. The seaming process completely encloses and seals all clips and fasteners for the most watertight seal available. The US-200 panel, in addition to the standard 90-degree seam, can be double-locked to obtain a 180 degree architectural profile. The standing seam system is especially suitable where roof slopes are long and/or low, and unusually long panels are required. Available in various gauges of galvanized steel, galvalume, zincalume, aluminum, copper, zinc and stainless steel. Regardless of which material is selected, the optional stiffening ribs or striations are highly recommended in order to reduce the slight surface waviness of the metal known as “oil-canning.” Note: “oil-canning” is a natural phenomenon inherent in sheet metal products and therefore is not cause for rejection of the material.http://www.ultraseam.com
US-150C Curved
US-150C Curved.
When aesthetic requirments call for a curved roof, the Ultra Seam US_150C Curved Panels is the system of choice. The mechanically seamed panels can be curved to a 19" inch radius.http://www.ultraseam.com
When aesthetic requirments call for a curved roof, the Ultra Seam US_150C Curved Panels is the system of choice. The mechanically seamed panels can be curved to a 19" inch radius.http://www.ultraseam.com
Roof/Wall Accessosries
Roof/Wall Accessosries
Ceco has translucent panels for wall or roof use to match most panel configurations. These panels allow you to put natural light where you need it.The roof panels are manufactured from a polyester resin reinforced with a mesh of woven fiberglass cloth and chopped glass fibers. The wall panels are made similarly but without the woven fiberglass reinforcing.Translucent panel installation is very similar to steel panel installation since they corrugate with adjacent steel panels at both end laps and side laps. Also, translucent roof panels are available with the CLP and CXP standing seam roof.http://www.ultraseam.com/
Our Construction Professionals
Our Construction Professionals
Our Construction Professionals team is the sensible way to construct low-rise office buildings. We combine a Ceco metal building system with local materials such as glass, masonry or EIFS to create the aesthetics you demand. Plus, the speed and economy of the systems approach, along with the discipline it imposes, help to insure your project will be completed on time and on budget. http://www.ultraseam.com/
Our Construction Professionals team is the sensible way to construct low-rise office buildings. We combine a Ceco metal building system with local materials such as glass, masonry or EIFS to create the aesthetics you demand. Plus, the speed and economy of the systems approach, along with the discipline it imposes, help to insure your project will be completed on time and on budget. http://www.ultraseam.com/
Repair or Replace
http://www.ultraseam.com/
Repair or Replace
Understanding potential weaknesses of roofing material also requires knowledge of repair difficulties. Individual slates can be replaced normally without major disruption to the rest of the roof, but replacing flashing on a slate roof can require substantial removal of surrounding slates. If it is the substrate or a support material that has deteriorated, many surface materials such as slate or tile can be reused if handled care fully during the repair. Such problems should be evaluated at the outset of any project to determine if the roof can be effectively patched, or if it should be completely replaced.Will the repairs be effective? Maintenance costs tend to multiply once trouble starts. As the cost of labor escalates, repeated repairs could soon equal the cost of a new roof.The more durable the surface is initially, the easier it will be to maintain. Some roofing materials such as slate are expensive to install, but if top quality slate and flashing are used, it will last 40-60 years with minimal maintenance. Although the installation cost of the roof will be high, low maintenance needs will make the lifetime cost of the roof less expensive.
Friday, August 15, 2008
Repair or Replace
Repair or Replace
http://www.ultraseam.com/ Repair or ReplaceUnderstanding potential weaknesses of roofing material also requires knowledge of repair difficulties. Individual slates can be replaced normally without major disruption to the rest of the roof, but replacing flashing on a slate roof can require substantial removal of surrounding slates. If it is the substrate or a support material that has deteriorated, many surface materials such as slate or tile can be reused if handled care fully during the repair. Such problems should be evaluated at the outset of any project to determine if the roof can be effectively patched, or if it should be completely replaced.Will the repairs be effective? Maintenance costs tend to multiply once trouble starts. As the cost of labor escalates, repeated repairs could soon equal the cost of a new roof.The more durable the surface is initially, the easier it will be to maintain. Some roofing materials such as slate are expensive to install, but if top quality slate and flashing are used, it will last 40-60 years with minimal maintenance. Although the installation cost of the roof will be high, low maintenance needs will make the lifetime cost of the roof less expensive.
http://www.ultraseam.com/ Repair or ReplaceUnderstanding potential weaknesses of roofing material also requires knowledge of repair difficulties. Individual slates can be replaced normally without major disruption to the rest of the roof, but replacing flashing on a slate roof can require substantial removal of surrounding slates. If it is the substrate or a support material that has deteriorated, many surface materials such as slate or tile can be reused if handled care fully during the repair. Such problems should be evaluated at the outset of any project to determine if the roof can be effectively patched, or if it should be completely replaced.Will the repairs be effective? Maintenance costs tend to multiply once trouble starts. As the cost of labor escalates, repeated repairs could soon equal the cost of a new roof.The more durable the surface is initially, the easier it will be to maintain. Some roofing materials such as slate are expensive to install, but if top quality slate and flashing are used, it will last 40-60 years with minimal maintenance. Although the installation cost of the roof will be high, low maintenance needs will make the lifetime cost of the roof less expensive.
Our Construction Professionals
Our Construction Professionals team is the sensible way to construct low-rise office buildings. We combine a Ceco metal building system with local materials such as glass, masonry or EIFS to create the aesthetics you demand. Plus, the speed and economy of the systems approach, along with the discipline it imposes, help to insure your project will be completed on time and on budget. http://www.ultraseam.com/
Our Construction Professionals
Our Construction Professionals team is the sensible way to construct low-rise office buildings. We combine a Ceco metal building system with local materials such as glass, masonry or EIFS to create the aesthetics you demand. Plus, the speed and economy of the systems approach, along with the discipline it imposes, help to insure your project will be completed on time and on budget. http://www.ultraseam.com/
Roof/Wall Accessosries
Roof/Wall Accessosries
Roof/Wall AccessosriesCeco has translucent panels for wall or roof use to match most panel configurations. These panels allow you to put natural light where you need it.The roof panels are manufactured from a polyester resin reinforced with a mesh of woven fiberglass cloth and chopped glass fibers. The wall panels are made similarly but without the woven fiberglass reinforcing.Translucent panel installation is very similar to steel panel installation since they corrugate with adjacent steel panels at both end laps and side laps. Also, translucent roof panels are available with the CLP and CXP standing seam roof.http://www.ultraseam.com/
Roof/Wall AccessosriesCeco has translucent panels for wall or roof use to match most panel configurations. These panels allow you to put natural light where you need it.The roof panels are manufactured from a polyester resin reinforced with a mesh of woven fiberglass cloth and chopped glass fibers. The wall panels are made similarly but without the woven fiberglass reinforcing.Translucent panel installation is very similar to steel panel installation since they corrugate with adjacent steel panels at both end laps and side laps. Also, translucent roof panels are available with the CLP and CXP standing seam roof.http://www.ultraseam.com/
US-150C Curved
US-150C CurvedUS-150C Curved. When aesthetic requirments call for a curved roof, the Ultra Seam US_150C Curved Panels is the system of choice. The mechanically seamed panels can be curved to a 19" inch radius.http://www.ultraseam.com
Standing Seam Metal RoofsMetal Roofing Profiles US-200
Standing Seam Metal RoofsMetal Roofing Profiles US-200
Standing Seam Metal RoofsMetal Roofing Profiles US-200Profiles US-200 Standing Seam Panel The Ultra Seam standing seam system utilizes state of the art technology for roof integrity and positive weather-tightness. The Ultra Seam US-200 panel has been extensively tested in both steel and aluminum, and meets the stringent requirements of the “Standard Test Method for Structural Performance of SSMRS by Uniform Static Air Pressure Difference,” which has been adopted as ASTM E-1592. Seams require machine closing, by either hand or power seamers, both available on a job rental basis. The seaming process completely encloses and seals all clips and fasteners for the most watertight seal available. The US-200 panel, in addition to the standard 90-degree seam, can be double-locked to obtain a 180 degree architectural profile. The standing seam system is especially suitable where roof slopes are long and/or low, and unusually long panels are required. Available in various gauges of galvanized steel, galvalume, zincalume, aluminum, copper, zinc and stainless steel. Regardless of which material is selected, the optional stiffening ribs or striations are highly recommended in order to reduce the slight surface waviness of the metal known as “oil-canning.” Note: “oil-canning” is a natural phenomenon inherent in sheet metal products and therefore is not cause for rejection of the material.http://www.ultraseam.com
Standing Seam Metal RoofsMetal Roofing Profiles US-200Profiles US-200 Standing Seam Panel The Ultra Seam standing seam system utilizes state of the art technology for roof integrity and positive weather-tightness. The Ultra Seam US-200 panel has been extensively tested in both steel and aluminum, and meets the stringent requirements of the “Standard Test Method for Structural Performance of SSMRS by Uniform Static Air Pressure Difference,” which has been adopted as ASTM E-1592. Seams require machine closing, by either hand or power seamers, both available on a job rental basis. The seaming process completely encloses and seals all clips and fasteners for the most watertight seal available. The US-200 panel, in addition to the standard 90-degree seam, can be double-locked to obtain a 180 degree architectural profile. The standing seam system is especially suitable where roof slopes are long and/or low, and unusually long panels are required. Available in various gauges of galvanized steel, galvalume, zincalume, aluminum, copper, zinc and stainless steel. Regardless of which material is selected, the optional stiffening ribs or striations are highly recommended in order to reduce the slight surface waviness of the metal known as “oil-canning.” Note: “oil-canning” is a natural phenomenon inherent in sheet metal products and therefore is not cause for rejection of the material.http://www.ultraseam.com
Metal Roofin Profile US-175LS
Metal Roofin Profile US-175LS
Metal Roofin Profile US-175LSUS-175LS Lock Seam Panel Ribs of adjacent Lok Seam panels snap together, enclosing the concealed clips and provide a positive metal-to-metal lock. In turn, the enclosed clips positively secure the adjacent panels to the roof structure. Seams require no machine closing, yet are continuously and securely locked in place. By eliminating the need for mechanical seaming, installation time and cost can be greatly reduced. Also available in 1-1/2" rib height (US-150LS). The US-150LS has a slightly different locking detail from the US-175.http://www.ultraseam.com
Metal Roofin Profile US-175LSUS-175LS Lock Seam Panel Ribs of adjacent Lok Seam panels snap together, enclosing the concealed clips and provide a positive metal-to-metal lock. In turn, the enclosed clips positively secure the adjacent panels to the roof structure. Seams require no machine closing, yet are continuously and securely locked in place. By eliminating the need for mechanical seaming, installation time and cost can be greatly reduced. Also available in 1-1/2" rib height (US-150LS). The US-150LS has a slightly different locking detail from the US-175.http://www.ultraseam.com
Standing Seam Metal Roofs
Standing Seam Metal Roofs
Metal Roofing Profiles US-200Profiles US-200 Standing Seam Panel The Ultra Seam standing seam system utilizes state of the art technology for roof integrity and positive weather-tightness. The Ultra Seam US-200 panel has been extensively tested in both steel and aluminum, and meets the stringent requirements of the “Standard Test Method for Structural Performance of SSMRS by Uniform Static Air Pressure Difference,” which has been adopted as ASTM E-1592. Seams require machine closing, by either hand or power seamers, both available on a job rental basis. The seaming process completely encloses and seals all clips and fasteners for the most watertight seal available. The US-200 panel, in addition to the standard 90-degree seam, can be double-locked to obtain a 180 degree architectural profile. The standing seam system is especially suitable where roof slopes are long and/or low, and unusually long panels are required. Available in various gauges of galvanized steel, galvalume, zincalume, aluminum, copper, zinc and stainless steel. Regardless of which material is selected, the optional stiffening ribs or striations are highly recommended in order to reduce the slight surface waviness of the metal known as “oil-canning.” Note: “oil-canning” is a natural phenomenon inherent in sheet metal products and therefore is not cause for rejection of the material.http://www.ultraseam.com
Metal Roofing Profiles US-200Profiles US-200 Standing Seam Panel The Ultra Seam standing seam system utilizes state of the art technology for roof integrity and positive weather-tightness. The Ultra Seam US-200 panel has been extensively tested in both steel and aluminum, and meets the stringent requirements of the “Standard Test Method for Structural Performance of SSMRS by Uniform Static Air Pressure Difference,” which has been adopted as ASTM E-1592. Seams require machine closing, by either hand or power seamers, both available on a job rental basis. The seaming process completely encloses and seals all clips and fasteners for the most watertight seal available. The US-200 panel, in addition to the standard 90-degree seam, can be double-locked to obtain a 180 degree architectural profile. The standing seam system is especially suitable where roof slopes are long and/or low, and unusually long panels are required. Available in various gauges of galvanized steel, galvalume, zincalume, aluminum, copper, zinc and stainless steel. Regardless of which material is selected, the optional stiffening ribs or striations are highly recommended in order to reduce the slight surface waviness of the metal known as “oil-canning.” Note: “oil-canning” is a natural phenomenon inherent in sheet metal products and therefore is not cause for rejection of the material.http://www.ultraseam.com
Subscribe to:
Posts (Atom)