Ultra Seam Product Colors

Ultra Seam products are available with a premium polyvinylidene fluoride (PVDF) based coating system that provides exceptional color stability, chalk resistance, durability, abrasion resistance, and flexibility. Ultra Seam products are available in G-90 hot-dipped galvanized steel, galvalume, zincalume, aluminum, copper, zinc and stainless steel.

Please reference the color chart below for available standard stock and premium stock colors. The colors shown are as accurate as the printing process allows, but will vary from finished product. For actual color samples, and information regarding special colors and finishes, please contact your nearest Ultra Seam representative.


Environmentally Smart Colors - Designed Energy Efficient

Solar White
Stone White
Sandstone Terra Cotta
Patina Green
Sierra Tan
Slate Blue
Dark Bronze
Colonail Red
Medium Bronze
Regal White EverGreen
Slate Gray
Pacific Blue
Burgundy Regal Red
Ash Gray
Hemlock Green
Charcoal Gray
Aged Copper
Metallic Color

*Silver Copper* Champagne* Pre-Weathered Galvalume®*
Non-Painted
CryliC Coated GalvaluMe
Traditional Non-Color Colors
Matte Black
Mansard Brown
Regal Blue Teal
Hartford Green




Certified Laboratory Test Report Summary



*Coating warranty varies for Regal Red, Copper, Champagne, and Pre-Weathered Galvalume®. Metallics are warranted for crack, chip, and peel only.
Please contact your representative for more information.
Colors shown are matched as accurately as possible, but may vary slightly from finished product.

Ultra Seam Projects

Name Sleep Inn
Architect Name
City Dougasville
State Georgia
Date Inserted February 1997
Panel Profile Ultra Seam US-175 Standing Seam Panel
Building Usage Hotels
Roof Area 10549

Ultra Seam Plant Locations

UltraSeam, Inc
P.O. Box 20502
Billings, MT 591045

Tel: (406) 252-2278
Fax: (406) 252-7910
tom@bradfordroof.com
www.bradfordroof.com

UltraSeam, Inc
1300 40th Street
Denver, Colorado 80205

Tel: (303) 292-1511
Fax: (303) 292-1676
usmetalscorp@qwest.net
www.usmetalscorp.com

UltraSeam, Inc
4328 East Magnolia
Phoenix, AZ 85034

Tel: (602) 437-9323
Fax: (602) 437-9274
JSporesAARA@qwest.net
www.aarametals.com

UltraSeam, Inc
3400 International Street
Fairbanks, AK 99701

Tel: (907) 456-3089
Fax: (907) 456-4079
beasleytodd@earthlink.net
www.ampusa.com

UltraSeam, Inc
91-079 Makakole Street
Kapolei, HI 96707

Tel: (808) 528-1790
Fax: (808) 682-8095
beasleytodd@earthlink.net
www.ampusa.com


UltraSeam, Inc
8660 Lambright Street
Houston, TX 77075

Tel: (713) 991-2202
Fax: (713) 991-4747
mfw@commercialsiding.com
www.commercialsiding.com

UltraSeam, Inc
P.O. Box 727
Destrehan, LA 70047

Tel: (504) 464-7441
Fax: (504) 464-6011
lhaydel@bellsouth.net

UltraSeam, Inc
P.O. Box 9017
Houma, LA 70361

Tel: (504) 872-4511
Fax: (504) 879-4551
judelap@lapmetal.com
http://www.lapmetal.com

UltraSeam, Inc
4530 126th Ave. N.
Clearwater, FL 33762

Tel: (727) 573-2255
Fax: (727) 573-2330
msystem3@tampabay.rr.com

UltraSeam, Inc
4333 Lynwood Court
Douglasville, GA 30134

Tel: (770) 920-1931
Fax: (770) 920-6838
dtrefzger@amsisupply.com
www.amsisupply.com

UltraSeam, Inc
239 Lowe Road
Piedmont, SC 29673

Tel: (864) 444-4311
Fax: (864) 947-1603
interstatp@aol.com

UltraSeam, Inc
2204 West Front St.
Statesville, NC 28677

Tel: (704) 871-8704
Fax: (704) 871-1381
Toll Free Number: 888-750-9827
www.cmpmetalsystems.com

UltraSeam, Inc
14432 St. Rt. 141 S.
Pride, KY 42437

Tel: (270) 333-9552
Fax: (270) 333-9702
info@prideindinc.com
www.prideindinc.com

UltraSeam, Inc
14432 St. Rt. 141 S.
Pride, KY 42437

Tel: (270) 333-9552
Fax: (270) 333-9702
info@prideindinc.com
www.prideindinc.com

UltraSeam, Inc
67 Benson Avenue
Hamilton, NJ 08610

Tel: (609) 586-4411
Fax: (609) 586-4422
interstatp@aol.com

UltraSeam, Inc
P.O.Box 1450
Briar Cliff Manor, NY 10510

Tel: (914)762-5311
Fax: (914)782-5434
mkmeyer@canopyroofing.com


UltraSeam, Inc
8059 Crile Road
Painesville, Ohio 44077

Tel: (440) 352-7800
Fax: (440) 352-7048
csm@commercialsiding.com

UltraSeam, Inc
17891 Ryan Road
Detroit, MI 48212

Tel: (313) 893-9810
Fax: (313) 893-9815
rlsteyer@aol.com

Standing Seam Metal Roofing

Ultra Seam metal roofing company has several locations across the United States. We offer the finest in metal roofing products. Call us today for more information about our standing seam metal roofing.

Join our Network

Would you like to become a part of our network? Contact us today by clicking here.

Ultra Seam, Inc.

Ultra Seam metal roofing and siding products provide an ideal architectural solution for almost any type of structure. Ultra Seam products utilize state of the art continuous panel length technology to provide the perfect blend of function and aesthetics at competitive prices. With fifteen manufacturing facilities nationwide, Ultra Seam products are readily available to meet your demanding construction schedule.

Whether your requirements are for low or steep slope, mansard, retrofit, or equipment screens to hide rooftop clutter, Ultra Seam systems are suitable for either spanning across purlins on typical spacing, or laid directly over rigid insulation and/or solid decking. Many combinations of panel widths, rib heights and seam profiles provide extensive application and design flexibility.

Ultra Seam systems include panels, clips, fasteners, and flashing, custom designed to meet the needs of your particular project. Ultra Seam products are available in 22, 24 and 26 gauge galvanized steel, galvalume, zincalume, .032 or .040 aluminum, copper, zinc and stainless steel.

Ultra Seam Project

Name Garfield Heights High School
Architect Name
City Garfield Heights
State Ohio
Date Inserted 2003
Panel Profile Ultra Seam US200 Standing Seam Panel
Building Usage School
Roof Area 100000

Ultra Seam Project

Name Camp Perry Barracks
Architect Name
City Camp Perry
State Ohio
Date Inserted 2001
Panel Profile Ultra Seam US200 Standing Seam Panel
Building Usage Military
Roof Area 75000

Ultra Seam Projects

Name: Sleep Inn
Architect Name:
City: Dougasville
State: Georgia
Date Inserted: February 1997
Panel Profile: Ultra Seam US-175 Standing Seam Panel
Building Usage: Hotels
Roof Area: 10549

For your standing seam metal roofing projects, visit us online!

Misc. Details

Misc. Details
Flush Panel Fascia to Soffit Flush Panel
Inside Corner (plan)
Flush Panel Outside Panel (plan)
Flush Panel Soffit to Wall Panel
Gutter/Down Spout
Detail Gutter Expansion Joint
Pipe Penetration
Pitch Break Detail
Panel Expansion Joint
Parapet Coping Detail

Ultra Seam US-200C Standing Seam Panel

When aesthetic requirements call for a curved roof, the Ultra Seam US-200C Curved Panel is the system of choice. The mechanically seamed panels can be curved to a 19” inch radius.

US-100FP FlushPanel Wall & Soffit System

The Ultra Seam Flush Panel system is ideal for gable walls and soffits where a smooth flat surface is desired. Horizontal flanges of 1-1/8" or 1-1/2” seams interlock and provide attachment surfaces for concealed fasteners. The panel seam combined with attachment flanges strengthens the panel to provide good spanning capacity. Fewer supporting structural members needed for high gables and wider soffits means lower installation cost. Available in twelve inch and sixteen inch widths.

UltraSeam US-200SB Standing Seam Panel

For a distinctive bold rib appearance, the Ultra Seam Snap Batten is the system of choice. Battens are attached securely with locking clips over a standing seam US-200 profile (see page 4). Wherever concealed gutters, or a “fold-under look”, are desired (see photo) batten covers are easily installed.

Ultra Seam US-100CS Standing Seam Panel

Cap Seam panel has a single upstanding leg on each side. After a panel is laid, the clips are installed up against the panel leg, with half of each clip folded over the leg. The adjacent panel is then laid up against the clips, and the other half of each clip is folded down. Finally the batten cap is snapped down over all clips in the seam along the entire length of the panel. The panels are now securely attached with the completed seam enclosing all clips. Seams require no machine closing and rapid installation means low in-place cost. Also available in 1-1/2" rib height (US-150CS). Cap Seam panel can also be curved or tapered. These panels create an architecturally desirable look without jeopardizing the integrity of the roof panel. The installation of the curved cap seam panel (US-100 CCS) and the tapered cap seam panel (US-100 TCS) is the same as the straight cap seam panel (US-100 CS).

Ultra Seam US-150C Curved Panel

When aesthetic requirements call for a curved roof, the Ultra Seam US-150C Curved Panel is the system of choice. The mechanically seamed panels can be curved to a 19” inch radius.

Ultra Seam US-150 panel

The Ultra Seam standing seam system utilizes state of the art technology for roof integrity and positive weather-tightness. The Ultra Seam US-150 panel has been extensively tested in both steel and aluminum, and meets the stringent requirements of the “Standard Test Method for Structural Performance of SSMRS by Uniform Static Air Pressure Difference,” which has been adopted as ASTM E-1592. Seams require machine closing, by either hand or power seamers, both available on a job rental basis. The seaming process completely encloses and seals all clips and fasteners for the most watertight seal available. The US-150 panel, in addition to the standard 90-degree seam, can be double-locked to obtain a 180 degree architectural profile. The standing seam system is especially suitable where roof slopes are long and/or low, and unusually long panels are required. Available in various gauges of galvanized steel, galvalume, zincalume, aluminum, copper, zinc and stainless steel. Regardless of which material is selected, the optional stiffening ribs or striations are highly recommended in order to reduce the slight surface waviness of the metal known as “oil-canning.” Note: “oil-canning” is a natural phenomenon inherent in sheet metal products and therefore is not cause for rejection of the material.

The US-150LS Profiles

Ribs of adjacent Lok Seam panels snap together, enclosing the concealed clips and provide a positive metal-to-metal lock. In turn, the enclosed clips positively secure the adjacent panels to the roof structure. Seams require no machine closing, yet are continuously and securely locked in place. By eliminating the need for mechanical seaming, installation time and cost can be greatly reduced. Also available in 1-1/2" rib height (US-150LS). The US-150LS has a slightly different locking detail from the US-175. (see below)

Standing Seam Roofing Panels

The Ultra Seam standing seam system utilizes state of the art technology for roof integrity and positive weather-tightness. The Ultra Seam US-200 panel has been extensively tested in both steel and aluminum, and meets the stringent requirements of the “Standard Test Method for Structural Performance of SSMRS by Uniform Static Air Pressure Difference,” which has been adopted as ASTM E-1592. Seams require machine closing, by either hand or power seamers, both available on a job rental basis. The seaming process completely encloses and seals all clips and fasteners for the most watertight seal available. The US-200 panel, in addition to the standard 90-degree seam, can be double-locked to obtain a 180 degree architectural profile. The standing seam system is especially suitable where roof slopes are long and/or low, and unusually long panels are required. Available in various gauges of galvanized steel, galvalume, zincalume, aluminum, copper, zinc and stainless steel. Regardless of which material is selected, the optional stiffening ribs or striations are highly recommended in order to reduce the slight surface waviness of the metal known as “oil-canning.” Note: “oil-canning” is a natural phenomenon inherent in sheet metal products and therefore is not cause for rejection of the material.

Visit our website at Ultra Seam to view our standing seam metal roofing profiles.

Retrofit Roofing Systems

Sloped roofs beat flat roofs every time! Ponding water and roofs with internal drains can cause structural problems and require continual maintenance. These problems can be greatly reduced or eliminated by adding a slight pitch and installing an Ultra Seam standing seam metal roof. For more information on adding slope and insulation to flat roofs contact us today for a complete design booklet.
Although photographed here on a sunny day, this newly installed and slightly sloping Ultra Seam Standing Seam Metal Roof would have been as free of “ponding” on the same rainy day that the old, flat roof was photographed.

Retrofit Metal Roofing Systems

The concept consists of an Ultra Seam metal roofing system supported on an engineered metal framing system, which also creates the desired slope. Low cost addition of insulation is optional. Due to the systems extremely light weight, the new assembly can usually be installed right over the existing roofing without tear-off. Introduction of slope to the flat roof allows re-routing of drainage to eliminate troublesome internal drains.

Regrofit Systems

Put slope to your flat roof with our Retrofit Systems

In recent years a new metal re-roofing concept has been developed for retrofitting existing leaking flat roofs. With this new system, typical metal roof benefits of classic neat appearance, wide color choice, light weight and long lasting leak-free service life have become a “fountain of youth” for many older buildings.

Notice how the churches architecture has been unified and strengthened with two additional elements: a sloping roof over its low wing, and a harmonizing spire.